Kreg Edge vs Festool Domino vs a $59 Doweling Jig: Real Cost Per Joint

Kreg Edge vs Festool Domino vs a $59 Doweling Jig: Real Cost Per Joint - A step into the workshop.
Stop Wasting Wood
Generate clear cut diagrams instantly with our new Cutlist Optimizer. Plan your cuts to make your next build easier.
Yo, let me tell you a story. A guy in my building — third floor, walks his dog at six in the morning — texts me a photo of a slab leaning on a brownstone stoop. Free pile. I hauled it up two flights, got weird looks from a woman on the stairs, and the whole time I'm thinking: how am I joining this? My shop is the second bedroom my landlord believes is for guests. No truck, no dust collection except a window fan, walls thin enough that my neighbour knocks when the router runs past eight.
So I did what you do. Opened three tabs. Kreg Edge. Festool Domino. A doweling jig under sixty bucks. And then I did the thing the sticker price never tells you: I worked out the cost per joint.
The Sticker Prices, Straight
The Kreg Edge kit, item KPTBEDGE100B, lists at $499.99 at Kreg's own store. That's the tool, a Blue Ion 4.0 Ah battery, a charger, the Narrow Stock Guide, the Stability Base, a 6mm cutter, and a sample pack of tenons. The bare tool — "Tool Only" at Kreg, model KPTEDGE100B — is $449.99. Same tool either way; the kit just makes it possible to actually turn it on.
Festool's DF 500 RQ-Set, item 578544, is $1,359.00. Acme Tools shows that figure in its Affirm financing example and 731 Woodworks states the DF 500 "retails for $1,359." The set includes the joiner, one DOMINO router, an additional stop, a trim stop, two cross stops, a wrench, a power cable, and a Systainer.
The doweling jig is the punchline here. WOOD Magazine's dowel-joinery guide says straight out that "for less than $60, a self-centering jig with removable drill-guide bushings handles most doweling." Their example list has a Rockler at $12, a Woodworker's Supply at $36, a Lee Valley at $59, and the Dowelmax at $310. So the "$60 doweling jig" in the title is really a Lee Valley-class self-centering jig around $59. Not the Dowelmax. That's a different purchase.
Run the subtraction. Kreg kit to Festool set: $859.01. Bare Kreg to Festool, the way 731 Woodworks frames it: "$910 difference." Kreg kit to the $59 jig: about $441. 731 Woodworks' line is that the Edge is "roughly one-third the cost of the Festool Domino DF 500," and that tracks.
But none of those numbers are the true cost. They're the entrance fee.
Cutters and Tenons Change the Math
The Kreg Edge box ships with one cutter — the 6mm — and that's it. Kreg's Q&A is clear on this, and 731 Woodworks flagged the same thing. The mortising cutters (5, 6, 8, 10mm) are $39.99 each on Kreg's store. They're carbide-tipped and, per 731 Woodworks, "rated for 5,000 or more joints," so this isn't a per-project cost — but if you want to work in 8mm or 10mm, you're adding $39.99 to get there. Want all four sizes? That's three cutters beyond the box: $119.97.
The Festool DF 500 runs cutters from 4mm to 10mm, and its set ships with a 5mm cutter. Its range tops out at the same 10mm the Kreg does. So for the sizes both tools share, the Festool tenon count isn't buying you extra capability — it's buying you a different factory setup.
Here's the surprise. Because the cutters and tenons interchange — Kreg's own Q&A says the Kreg Edge cutters are compatible with the Festool Domino, and 731 Woodworks confirms the tenons work in either tool — you're not locked into either brand's stock. And by that math, Festool's tenons are cheaper in every size. 731 Woodworks did the arithmetic: at 6mm, Kreg runs $15.99 for 75 (21.3¢ each) against Festool's $25.00 for 190 (13.2¢ each). At 8mm, 32.0¢ against 19.2¢. At 10mm, Kreg's $13.99 for 25 comes to 56.0¢ each, against Festool's $25.00 for 85 at 29.4¢. Same joint, different cents.
The other thing 731 Woodworks caught: length. The Kreg tenons in that comparison run 20, 22, and 24mm; the Festool 8mm and 10mm run 40 and 50mm. You're buying glue surface with the tenon length, and at the big sizes the two brands aren't selling the same part. Festool's full range runs 4 x 20mm up to 10 x 50mm in beech or weatherproof sipo, per Festool USA.
What the $499 Kreg Actually Copies
This is where you have to be honest about the price gap. The Kreg Edge is not a Domino with the badge filed off. But it isn't just a powered doweler either.
Replicated, genuinely:
- Loose-tenon joinery — a carbide cutter machines the mortise, a pre-made tenon glues in, hidden joint. Same principle as the Domino.
- Interchangeable cutters and tenons. This is the biggest one. Buy the tenon that's cheaper; buy the cutter that's available.
- Angled and mitered mortising. Both fences run 0–90° with stops at 0°, 22.5°, 45°, 67.5°, and 90°, per 731 Woodworks' comparison table. If you're mitering door frames, both tools do it.
- Mortise width adjustment for glue-up. Kreg has one-touch width adjustment; Festool has three increments by knob. 731 Woodworks calls the Kreg version "the feature that saves you during glue-up."
- Repeatable placement. Kreg gives you configurable edge stops plus the auto-centering Narrow Stock Guide. Festool uses four self-referencing pins plus the optional cross stop and trim stop.
- Imperial/metric flexibility. The Kreg ships imperial, with a swappable metric height scale in the box.
What It Doesn't Copy
The rerun, size by size:
- No 4mm cutter. Kreg supports 5, 6, 8, and 10mm only. Festool goes down to 4mm, and Festool USA notes the DF 500 joins workpieces "as thin as 12 mm."
- Max plunge depth is not published for the Kreg. Festool's is 28mm (1-1/16") with preset stops at 12, 15, 20, 25, and 28mm. 731 Woodworks tried to source the Kreg figure and couldn't. Take from that what you will.
- Spindle speed isn't published for the Kreg either. Festool publishes 25,500 RPM no-load. You can't compare cut quality on a number the maker doesn't give you.
- Dust extraction. Festool runs a 27mm dust port and recommends an extractor, which in an apartment is a whole separate problem. Kreg leans on chip-relief slots to survive short sessions without one. One Kreg customer review on the company's product page says the dust collection "is not good... it leaves a lot behind," and that something inside "bisects the dust collection opening" and clogs on white oak. That's an unverified review, not a test — but in my second bedroom, "leaves a lot behind" is a real sentence.
- Corded versus cordless. Festool is corded, 420W, 13.1 ft cord. Kreg is 20V brushless. Cordless in a room with two outlets is freedom; cordless on a long run is a countdown. One Kreg review reports roughly 110 tenons and then "the battery did not last — I had to interrupt and recharge." Also unverified, also familiar.
- Trim stop and cross stop. The Festool set includes a trim stop and two cross stops (Acme Tools). Kreg's kit lists a Narrow Stock Guide and Stability Base, and Kreg's store page as fetched doesn't list a trim-stop or cross-stop equivalent. Whether they sell one — can't say. Don't assume they do.
- No case. Kreg's Q&A says so. The foam insert fits a Systainer³ M 237 (Festool part 204843) if you cut a ½"×½" notch. Your $499 tool arrives in a box you'll be finding in six months.
Then There Are Clamps
Every one of these three joins needs clamping, and clamps are money. WOOD Magazine specifies clamping dowel joints for one hour; loose-tenons are the same category of glue-up. The honest structural answer is: budget for clamp stock as a separate line item, because in an apartment, long parallel clamps are the tool you always need one more of. I don't have a sourced price hit for you in this piece. That's not me dodging — get the clamp count before you talk yourself into the Festool.
The Doweling Jig Is a Different Animal
The $59 self-centering jig isn't a smaller Domino. It drills a hole and you pound a fluted dowel. WOOD Magazine says 1/4" and 3/8" dowels "handle most jobs," recommends expandable fluted dowels, and notes compressed fluted ones "expand about 1/32" on contact with moisture in the glue." That expansion is the whole trick.
Against a loose-tenon machine: no mortise cutter to buy, no tenon stock to buy, just dowels. But no mortise either — you're still drilling holes, one by one, and your joint's accuracy lives on the jig's bushings. If your question is "how do I join this slab for the least money in an apartment," the answer is the jig. If your question is "how do I join a thousand things and finish?" the answer is the machine.
My Call
If you're a one-project-a-month woodworker like me, buy the Kreg kit. Its real cost-per-joint advantage over the Festool isn't the $859 in the sticker — it's that Kreg's cutters and tenons work in the Festool ecosystem, so you can buy the cheaper consumable every time. The workflow differences (4mm cutter, published depth and speed, trim stop, dust port) only matter if you're building thin stock or trimming to a pin referenced in the factory.
If you're building with 4mm tenons, or you need a trim stop in the set, spend the $859 the other way. If your budget is a rent check and a $59 Lee Valley jig, buy the jig and a good set of clamps, and know you're making a different joint — not a worse one, a different one.
My slab? The Kreg Edge gets it. But first I'm buying a moisture meter, because the number on that slab is what decides whether I can even start.